microPREP® PRO Webinars
In the last few years, we have made a series of microPREP webinars in which we have given insights into the functionalities of the microPREP PRO. These webinars explained how labs could profit from laser-based sample preparation. We showed how other microPREP PRO users use the laser tool to reduce their time for the preparation of specimens.
You still have the chance to watch these webinars online. Simply click on the links below to register and watch the webinars.
Femtosecond laser ablation-based preparation methods for high resolution materials characterization
SEM image of processed Titanium Nitride on Silicon microtip arrays using the microPREP PRO FEMTO. Image courtesy of the University of Leoben.
Are you ready to revolutionize your specimen preparation processes? We are excited to announce a webinar featuring Dr. Tkadletz from Montanuniversität Leoben, who will explore the latest advancements in integrating modern specimen preparation equipment for transmission electron microscopy (TEM) and atom probe tomography (APT). This webinar will provide insights into how these modern specimen preparation techniques can significantly reduce complexity, improve efficiency, and facilitate faster and more effective investigations in materials research.
Our partner Rave Scientific is hosting the webinar.
Key Highlights:
- Cutting-Edge Integration: Discover how combining fs-laser ablation systems like the 3D-Micromac microPREP PRO FEMTO with focused (FIB) and broad (BIB) ion-beam polishing devices sets new standards in specimen preparation.
- Efficiency and Flexibility: Learn about the significant advantages of reduced effort, exceptional time efficiency, and flexibility in designing specimen geometries such as discs, half-grids, microtip arrays, and whole sample holders.
- Rapid Pre-Preparation: Understand how fs-laser ablation enables the rapid pre-preparation of TEM and APT specimens, often within minutes, streamlining the final preparation steps.
- Advanced Techniques: Explore the integration of complementary techniques like electron backscatter diffraction, energy dispersive X-ray spectroscopy, and FIB secondary ion mass spectroscopy for site-specific preparation.
- Eliminating Conventional Steps: See how modern techniques eliminate the need for FIB lift-outs and conventional dimple grinding, optimize materials research workflows, and enhance specimen throughput.
Speaker: Dipl.-Ing. Dr.mont. Michael Tkadletz (Chair of Functional Materials and Materials Systems, Montanuniversität Leoben, Austria)
Introduction to the New Large Volume Workflow for Semiconductor Advanced Packaging Failure Analysis
In our webinar “Introduction to the New Large Volume Workflow for Semiconductor Advanced Packaging Failure Analysis,” we show general approaches for:
- Synergistic workflow combining plasma FIB technology and high-speed laser ablation technique (microPREP® PRO)
- Analysis process and enhanced precision of results
- Challenges in identifying defects buried deep under surfaces in advanced packaging technologies
Additionally, you get the latest update on the TESCAN Large Volume Workflow, developed in collaboration with industrial partners from the European FA4.0 project:
- New shared sample holder compatible with various defect localization instruments
- Essence AutoSection™ software for automated sample holder alignment and ROI identification
Presenter: Lukas Hladik, Product Marketing Manager at TESCAN Group, has specialized in Plasma FIB-SEM and failure analysis solutions. His work is closely linked with the global semiconductor industry.
Laser Micromachining Mythbusting
Is laser micromachining the solution for everything? Can any laser source machine any material? Which accuracies can be achieved with a laser micromachining tool such as the microPREP PRO? And what do you need to watch out for to achieve the best results?
This webinar will bust some of the most common laser micromachining myths and give you hands-on advice on handling it. Amongst others, the following topics will be covered:
- Which materials and material combinations can be processed by laser?
- How can contamination be prevented while working with lasers?
- Which laser sources are available? And which laser source is suited for what?
- What kind of micromachining is possible with the microPREP™ PRO? What are the limits?
- How accurately can you work while using lasers?
Workshop: Micromachining Without Limits with microPREP® PRO’s Custom Shape Process
Do you know microPREP PRO’s Custom Shape Process? This process allows ablating almost any given shape from your sample with only a few clicks.
And did you know that this Custom Shape Process can be combined with several different laser parameters? This allows any microPREP PRO user to ablate their specimens very selectively – layer by layer.
In this workshop, we will show you the following:
- How to work with microPREP PRO’s Custom Shape Process
- How to selectively ablate with microPREP PRO
- How stacks made of different materials (e.g., RAM or SSD modules) can be opened with microPREP PRO
Lab (r)evolution - Best practice for laser-based sample preparation
Our “Lab (r)evolution”-webinar shows you examples of best practices for laser-based sample preparation.
This webinar covers the following topics:
- Basics of laser-based preparation of different materials
- Reasons for laser-based sample preparation
- Laser-based sample preparation with microPREP PRO: Stages and Fixtures
- microPREP PRO vs. other methods of sample preparation for FIB & Co.
Laser-Micromachining for Fast and Accurate Cross-Sections?
This webinar shows how the microPREP PRO can be used for SEM and micromechanics sample preparation.
This webinar covers the following topics:
- How to choose your sample designs: Free-form cutting and box milling
- How to find the area of interest (AOI) within seconds and start the machining – fast and accurate
- How to use the CO₂ Snow Jet to remove particles and debris – quick and clean
- How microPREP PRO helps to prepare even large samples and thus reduces additional preparation steps in advance
TEM-Lift-Out with a Tweezer? microPREP PRO for TEM Sample Preparation
Our webinar “TEM-Lift-Out with a Tweezer?” focuses on how microPREP PRO can be used for TEM Sample Preparation.
In this webinar, we show you the following:
- How to adapt workflows to prepare TEM lamellas within one process
- How to cut your own TEM grid within the process
- How to use the XL-Chunk workflow for larger samples
- How to lift the TEM package out with a tweezer
Laser Micro-Drilling of µ-Scale Cylinders within Minutes? microPREP® PRO for 3D-Analysis Sample Preparation
In our webinar “Laser Micro-Drilling of µ-Scale Cylinders within Minutes?” how microPREP PRO can be used for 3D-Analysis Sample Preparation.
This webinar will give you insights on the following topics:
• How to use laser micro-machining to speed up your sample preparation for 3D-Analysis
• How to use the unique microPREP workflows for fast and site-specific sample preparation
• How to avoid additional polishing processes for micro- and nano-CT
• How to reduce the time to prepare pillars for APT
Do you want to know how to operate Laser-Micro-Machining powered by 3D-Micromac?
Our webinar “Do you want to know how to operate Laser-Micro-Machining powered by 3D-Micromac?” is another introductory webinar in which we give a short overview of laser micromachining. In this webinar, we show that laser micromachining can be as easy as making coffee.
You are getting a short introduction to how intuitive the microPREP PRO tool can be. Afterward, we did a live demonstration of the microPREP PRO Advanced Chunk recipe. These chunks are perfect for TEM, x-CT, and micromechanical analysis.
microPREP® PRO Updates
Especially for our users of the microPREP PRO system worldwide, we are giving regular updates on new features and updates of the microPREP PRO.
If you have missed any of these webinars or want to check out the latest features, you can re-watch these updates here.
microPREP® PRO: Custom Shape 2.0 & Improved Box Milling - Update to the Next Level (November 2022)
microPREP PRO Update
In our webinar “microPREP® PRO Update 2022: Custom Shape 2.0 & Improved Box Milling”, we are giving you an overview of the latest updates for the microPREP PRO system. And, of course, we explain how these updates can facilitate your lab work. The main focus of the November 2022 edition is:
Custom Shape 2.0:
Learn how to put together your own custom shapes for the preparation of your samples
directly in the microPREP PRO software
without the need for a CAD program
Improved Box Milling Workflow:
Now you can change your preparation geometry live during processing.
Giving you the freedom to react to what you discover while preparing your specimen.
Finding the Missing Link: Connect Your Material Analysis Equipment (January 2022)
How much time do you spend searching for your area of interest in your specimens? Can you quickly find that area again the next day? Have you ever lost important information about your specimen because someone just jotted it down (and the note has been misplaced afterward)? Are you looking for a more innovative way to transfer information about your samples and how you prepared them from one analysis tool to another?
Our colleague Karl has handed in his diploma thesis on a possible solution to transfer specimens between different analysis equipment easier. We want to discuss his findings and possible solutions daily with those dealing with those problems.
The following topics will be discussed on this occasion:
- What are the reasons behind Karl’s search for the missing link?
- How is the market dealing with the problem?
- What would be the key benefits of a possible solution?
- What else would be needed?
microPREP® PRO: New Ramp Workflow, Improved Scan Regimes, Image Overlay - Update to the Next Level (November 2021)
microPREP PRO Update
Our laser micromachining system, microPREP PRO, is constantly evolving. As our customers and users of the microPREP PRO are giving us feedback on what they need to make their sample preparation tasks even more accessible, we are continuously developing new workflows, recipes, and accessories.
This webinar will give you an overview of the latest updates for the microPREP PRO system and explain how these updates can facilitate your lab work.
Amongst others, the following topics will be covered:
- New Ramp Workflow: Learn how to save precious lab time by milling ramps instead of boxes into the sample and thus removing less material!
- Improved Scan Regimes: What does this mean for your samples and their surface quality?
- Image Overlay: Find out how to navigate on your specimen as quickly as on any construction plan!
microPREP® PRO: Update to the Next Level (April 2021)
microPREP PRO Update
In our webinar “Laser Micromachining in Your Lab – Update to the Next Level,” we introduce you to recent innovations implemented in our microPREP PRO System.
We will introduce our new workflows and show what is new on the microPREP PRO. In addition, this webinar will show you how these new developments can help you do your job even better.